| |
FACILITY GENERAL SAFETY RULES
- Horse-play in any form must not be engaged in by
all employees of the facility or while on duty.
- Running within facility premises must be avoided
except in case of emergency.
- Employees must not make inoperative any safety
devices such as relief valves, deluge valves,
electrical and mechanical interlocks, guards, seat
belts, etc. except for maintenance and testing with
approval of the facility manager or two supervisors
in the absence of the manager.
- All portable containers such as bottles, jugs,
or cans must be labelled as to contents.
- Flammable or toxic materials must not be dumped
into the sewers or waste water system.
- Wearing of finger rings, ties, and necklaces is
not permitted while operating fixed and power tools
and is discouraged in all operating, maintenance and
service areas.
- All employees are expected to wear clothing that
is safe and appropraite for their jobs.
Company-furnished uniforms and protective equipment
must not be altered in any manner that impairs the
needed protective features.
- Strictly "No Smoking" at facilities, except in
designated areas.
- Contact lenses are not permitted in areas where
the possibility of exposure to hazardous chemicals
exists, and are discouraged in other production
areas also.
- Seat belts must be used at all times while
riding vehicles, including personal vehicles.
- All motor vehicle accidents involving personnel
on company business trips must be reported to the
Supervisor, Facility Manager, Safety Department and
Area Manager.
- Supervisor shall be notified when an employee
needs to leave work due to illness.
- Always notify your supervisor of any injury or
accident. Late developing injuries should also be
reported.
- Only authorized personnel shall operate any
mobile equipment.
SITE SPECIFIC SAFETY AND SECURITY RULES:
All Personnel
- All
personnel must wear hardhat, safety glass and safety
shoes. NO PPE, NO ENTRY.
- All
personnel shall submit for Security check/
inspection upon entry and exit.
- All
personnel shall gather at the parking area when
evacuation order is given.
- A CE
representative shall inspect all tools and equipment
brought into the plant.
-
Materials gate pass is required for all materials or
equipment brought outside the plant.
-
Prohibited acts or items:
-
Video
taking or picture taking.
- Fire
arms, bladed weapons, drugs and alcoholic beverages.
-
Smoking (except in smoking areas).
-
Horseplay, running and playing.
-
Wearing of Sandals, slippers, short pants and
sleeveless shirts.
All Third Party Personnel
-
All
contractor personnel are required to undergo
safety/ security induction prior to work.
-
A Safe
Work permit is required before the start of any
work.
-
Near
miss, accidents and incidents shall be reported
immediately to the supervisor.
-
Proper
working clothes shall be worn at all times.
-
Proper
housekeeping shall be observed at all times.
-
Full
body harness or fall protection equipment shall
be worn when there is risk of falling six (6) feet
below.
-
Contractors are not allowed to plug electrical
tools or extension wires on convenience outlets.
-
Only
qualified and certified operators shall operate
tools and equipment such as torque wrench,
sandblasting equipment, welding equipment,
forklift, cranes etc.
All Vendors and Visitors
-
All
suppliers and visitors are not allowed to go
around the plant unless escorted by a guard or
CE employee.
|
|